CT-MULTI-PORT-WASH-TOOL-OPEN
The CE Multi Port Wash Tool has a wide fan of multi-directional choked jetting ports giving maximised jetting coverage options. The chokes can be changed out to adjust to the required jetting velocity.
CT-MILLING-CIRCULATION-VALVE
The CE Milling Circulation Valve provides a constant fluid flow path to the motor or any BHA during milling operations, whilst also providing a means of high volume circulation capability to the annulus whenever required. It is designed to be run above a motor. The CE Milling Circulation Valve enables unlimited switching between milling operations …
CT-KNUCKLE-JOINT-ROTATING
The CE CT Knuckle Joint rotating tool is a fully sealed joint that provides the CT tool string with an inclusive 15 degrees of flexible deviation. The I.D. at the knuckle is bevelled in order to maximise the bore when the joint is at full deviation. The knuckle also enables the rotation of CT tool …
CT-KNUCKLE-JOINT-NON-ROTATING
The CE CT Knuckle Joint (non-rotating) is a fully sealed joint that provides the CT tool string with an inclusive 15 degrees of flexible deviation. The I.D. at the knuckle is bevelled in order to maximise the bore when the joint is at its full deviation.The knuckle is also able to transmit torque. FEATURES AND …
CT-KICKOVER-TOOL
The CE Coiled Tubing Hydraulically Activated Kickover Tool enables reliable running and retrieval of the gas lift valves using Coiled Tubing. The tool is “kicked over” by applying hydraulic pressure to the tool-string and is de-activated by bleeding off the pressure from the tool-string. Running the Kickover Tool in conjunction with a DTI Flow Control …
CT-HAMMERHEAD-BI-DIRECTIONAL-IMPACT-HAMMER
The Hammerhead Bi-Directional Impact Hammer delivers a controllable high frequency up or down impact to any downhole device. The frequency and magnitude of the impacts delivered are controlled via the flow rate and applied pressure force. A short length and the ability to configure the Impact Hammer as up only, down only or bi-directional make …
CT-FLUTED-CENTRALISER
CE CT Centraliser Fluted The CE CT Centraliser Fluted is a full bore component that ensures that the CT tool string is fully centralized within the well-tubing system. The O.D. of the tool is usually specially sized to tubing drift or to pass through any nipple restrictions. Large fluted flow paths are incorporated into the …
CT-EXTERNAL-SLIP-CONNECTOR
The CE CT External Slip Connector creates a full bore sealed joint between the outside of the coiled tubing and the CT tool string. The joint O.D. matches that of the tool string. The tapered slips with internal teeth bite onto the tubing and pull up into a tapered bowl, in a similar manner to …
CT-EXPANDING-BOW-SPRING-CENTRALISER
CE CT Centraliser Expanding Bow Spring The CE CT Centraliser Expanding Bow Spring is a hydraulically actuated tool with normally retracted bow springs. When the CT fluid flow/pressure at the tool is increased, the bow springs will expand up to the tubing I.D. and thus centralizing the tool string. This feature provides an efficient method …
CT-DUAL-ACTION-SPRING-JAR
CE Dual Action CT Spring Jare The CE Dual Action CT Spring Jar enables repeatable upward or downward jarring blows to the work string. The amount of tension or compression placed on the coiled tubing in order to fire the jar is dependent on the amount of preload force placed into the jar springs, which …